Mastercam Sample Lesson
2020 - 5 Axis Lesson 8
5 Axis Lesson 8
-
1
-
2Import Machine Files & Setup the Machine9 min | 1-2
-
3
-
4Use Mastercam to complete Task 1 and 2
-
5
-
6Use Mastercam to complete Task 3
-
7Open the Mastercam file9 min | 3
-
8Rough the part with OptiRest13 min | 4
-
9Use Mastercam to complete Task 4
-
10Finish the surface with Flow 5 Axis15 min | 5
-
11Use Mastercam to complete Task 5
-
12Finish the end slots with Curve 5 Axis9 min | 6
-
13Use Mastercam to complete Task 6
-
14Finish the middle slot with Curve 5 Axis6 min | 7
-
15Use Mastercam to complete Task 7
-
16Deburr the part6 min | 8
-
17Use Mastercam to complete Task 8
-
18Setup the Verify and Simulate options6 min | 9-10
-
19Use Mastercam to complete Tasks 9 and 10
-
20
-
21